Last updated: 15 November 2026. Fees and platform rules change. Check them at the time of publishing before you rely on a figure.
By Hamza, Dawraan.
Every beginner freelancer in Pakistan asks the same question, and almost every beginner answers it the same wrong way. They look at what other beginners charge, copy the lowest number, and hope the low price wins them work. It sometimes wins them one job. Then it traps them, because a client who hired you for being cheap will leave the moment someone cheaper appears, and raising your rate later feels impossible when your whole profile is built on low prices.
Here is my opinion, stated plainly: charging too little is the most common and most expensive beginner mistake in freelancing. It costs you more than charging too much ever will. A price that is too high loses you a job you can live without. A price that is too low wins you a job that eats your week, pays less than a shop assistant earns, and teaches the client that your time is worth nothing. Set your rate from your costs, not from your fear.
This guide shows you how to do that. You will work out a floor price from your own monthly target, then adjust it for platform fees, withdrawal costs and tax, so the number you quote is a number you can live on. The rates in this article are ranges and examples, never promises. No article can tell you what you will earn. It can only show you how to calculate what you must charge.
Short answer
To set your freelance rates in Pakistan, work out your floor first: your monthly income target divided by your billable hours. A target of Rs 60,000 a month over 80 billable hours gives a floor of Rs 750 an hour. Then add the platform fee on top: Fiverr takes 20 percent, Upwork takes 0 to 15 percent. Then allow for Payoneer withdrawal to JazzCash, which has a $5 minimum and a 3 percent fee. Quote the final number, not the floor.
Start with your floor, not with the market
Most rate guides start by telling you to check what others charge. That is backwards. What others charge tells you nothing about what you need. Start with your own numbers instead.
The floor formula is simple: your monthly income target divided by the hours you can actually bill. Billable hours are the hours a client pays for, not the hours you sit at your computer. A beginner who works 30 hours a week might bill 20 of them, because the other ten go to learning, applying for jobs, messages and admin. Use billable hours, not total hours, or your floor will be too low.
Worked example. Ayesha wants to earn Rs 60,000 a month from freelance writing. She can bill 20 hours a week, which is 80 hours a month. Her floor is Rs 60,000 divided by 80, which is Rs 750 an hour. If she charges less than Rs 750 an hour, she cannot reach her target even if every billable hour is filled. That number is her floor, not her price. Her price should sit above it, because not every hour gets filled and not every client pays on time.
A second example. Bilal wants Rs 100,000 a month from graphic design, and he can bill 25 hours a week, which is 100 hours a month. His floor is Rs 100,000 divided by 100, which is Rs 1,000 an hour. Two beginners, two different floors, because their targets and their hours are different. There is no single correct rate for a freelancer in Pakistan. There is only the rate that covers your target at your hours.
Run the formula for yourself before you read the rest of this guide. Pick a monthly target that is honest, not a dream. Count only the hours a client will actually pay for. The number you get is the lowest rate you can accept. Anything below it is charity work, and you should only do charity work when you choose to.
Hourly, fixed price or retainer: pick by the job
Once you know your floor, you need a pricing model. There are three, and each suits a different kind of work.
Hourly pricing suits work where the size is unclear: ongoing support, virtual assistance, research, or a client who keeps adding tasks. You charge for the hours you work, and the client pays for what they use. The risk is that a slow client can argue about hours, so track your time and report it. Upwork has a built-in time tracker for hourly contracts, which is one reason hourly work suits Upwork.
Fixed-price suits work with a clear deliverable: five articles, one logo, ten social media posts, a 60-second video. You agree the scope and the price before you start, and the client pays for the result, not your hours. Fixed price suits Fiverr, where the whole platform is built around defined packages. The risk is scope creep, where the client keeps adding work to a fixed price. The defence is a written scope with a fixed number of revisions, agreed before you start.
Retainer pricing suits regular work: a client who needs four blog articles every month, or twelve social media posts every week. You agree a monthly price for a set amount of work, and the client pays it every month. Retainers are the best model for a beginner who has one good client, because they turn uncertain income into a steady amount. Do not offer a retainer to a client you have never worked with. Offer it after two or three good jobs, when both sides know what the work looks like.
A beginner should be able to use all three. Quote hourly when the work is open-ended, fixed when the deliverable is clear, and retainer when the work repeats. The floor formula works for all three: divide your monthly target by your billable hours, then convert the hourly floor into a fixed price by estimating the hours the job takes and adding a margin.
Platform fees: the money you never see
Your rate is not your income. The platform takes its cut first, and beginners who forget this quote a rate that looks fair and then wonder where the money went.
Fiverr takes a flat 20 percent of every order. That is simple to calculate and hard to forget. A $50 order on Fiverr pays you $40, because Fiverr keeps $10. A $100 order pays you $80. There is no negotiation and no discount for volume. Build it into your price: if you want $40 for a job, you must charge $50 on Fiverr, not $40.
Upwork takes 0 to 15 percent per contract, set per contract and shown before you apply. In practice it is usually around 10 percent, so use 10 percent for your planning and check the contract itself for the exact figure. A $100 Upwork job at a 10 percent fee pays you $90. A $100 job at 15 percent pays you $85. Check the fee on the contract before you accept it, because the fee is part of your price whether you noticed it or not.
Worked example, full journey. You complete a $50 job on Fiverr. Fiverr takes 20 percent, which is $10, and you receive $40. You withdraw that $40 from Payoneer to JazzCash. The withdrawal fee is 3 percent, which is $1.20, so about $38.80 reaches you in rupees. The $50 the client paid became $38.80 in your pocket. That is not a complaint about the fees. It is the maths, and you should do it before you quote, not after you get paid.
The same job on Upwork at a 10 percent fee would pay you $45 after the platform fee, and about $43.65 after the 3 percent Payoneer withdrawal fee. The platform matters to your take-home pay, and it should matter to your price. Do not charge the same number on Fiverr and Upwork without doing this maths, because the same number is not the same income.
One more cost to remember: Payoneer to JazzCash has a $5 minimum withdrawal. A $4 balance stays in Payoneer until you earn more. Do not plan your month around withdrawing small amounts. Let small payments accumulate, then withdraw once.
If you have not started freelancing yet
Rates mean nothing until you have a skill, a profile and a way to find clients. If you are still at the beginning, start with the guide that takes you through the whole setup, from picking a skill to your first order.
Example starting ranges, and how to read them
The ranges below are examples to show how the floor formula works in practice. They are not market data and not promises. Rates change with skill, demand, reviews and the client. Use them as a starting point for your own calculation, then check live listings on Fiverr and Upwork for your skill before you set a price.
| Skill | Example starting range | Notes |
|---|---|---|
| Data entry | Rs 500 to 800 per hour | High competition, low barrier. Hard to raise quickly. |
| Content writing | Rs 1,000 to 2,500 per 1,000 words | Price per word count, not per hour, is normal here. |
| Social media design | Rs 1,500 to 4,000 per set of 5 posts | Fixed price per set is easier than hourly. |
| Short video editing | Rs 2,000 to 5,000 per video under 60 seconds | Price rises with effects, captions and revisions. |
| Virtual assistance | Rs 600 to 1,200 per hour | Hourly or monthly retainer both work. |
| Basic WordPress work | Rs 3,000 to 8,000 per small site | Fixed price, with a clear scope, or the job grows. |
Read the table as a floor check, not a price list. A data entry beginner whose floor is Rs 750 an hour can accept the middle of the data entry range. A writer whose floor is Rs 1,500 an hour cannot accept Rs 1,000 per 1,000 words if each 1,000 words takes two hours, because that is Rs 500 an hour, below the floor. The ranges only make sense when you run them through your own formula. Two freelancers with the same skill can have different correct rates, because their targets and their speed are different.
Speed changes your rate more than anything else. A writer who takes four hours to write 1,000 words earns Rs 250 an hour at Rs 1,000 per 1,000 words. The same writer, six months later, writes the same 1,000 words in two hours and earns Rs 500 an hour at the same price. Your rate should rise as your speed rises, or you are giving your improvement away free.
The PSEB tax note: small money, worth knowing early
Freelancers who earn from foreign clients should know about PSEB registration before they need it, not after. The Pakistan Software Export Board registers IT and IT-enabled service exporters, including individual freelancers. Under section 154A of the Income Tax Ordinance 2001, a PSEB-registered exporter on the Active Taxpayers List pays a final tax of 0.25 percent on export proceeds received through a banking channel. Without PSEB registration, the rate on the same income is 1 percent. The Finance Act 2026 extended the 0.25 percent rate to 30 June 2029. Conditions apply, including filing your return, so this is general information, not tax advice, and you should check the current rules at the time of publishing.
Worked example. A freelancer earns Rs 4,000,000 in a year from foreign clients, all received through a bank. At 0.25 percent, the tax is Rs 10,000. At 1 percent, the tax is Rs 40,000. The difference is Rs 30,000 a year, every year, for a registration that costs little. That is not a reason to register before your first client. It is a reason to register once freelancing becomes regular income, and to keep your earnings coming through proper banking channels so the lower rate applies.
Do not let tax stop you from starting. For a beginner earning small amounts, the tax question is a later problem. But do not ignore it forever either. The freelancers who get into trouble are the ones who earn serious money for two years, keep it all in a digital wallet, file nothing, and then discover the rules when a bank asks questions. Earn first, then register, then file. In that order.
When and how to raise your rates
A rate is not permanent. Raise it when one of three things is true. First, you are fully booked. If every hour you can bill is sold, your price is too low, because demand is higher than supply. Raise it by 10 to 20 percent and see what happens. Second, your speed has improved. If a job that took four hours now takes two, your effective hourly rate has doubled at the same price, and you can raise the price without working harder. Third, you have proof. Five good reviews, a repeat client, a portfolio with real results: each one is a reason to charge more than a beginner with none of them.
Raise rates on new clients first, not on existing ones. Tell an existing client in advance, with notice, and tie the rise to something real. “From next month, my rate for this work is Rs 1,200 an hour, up from Rs 1,000, because the work now includes the monthly report as well.” A client who is told a month ahead and given a reason will usually accept. A client who finds out from an invoice will not.
Never apologise for your rate. “Sorry, but I have to charge” tells the client you do not believe your own price. State the price, state what is included, and stop talking. Silence after a price is not rudeness. It is confidence, and clients read it that way.
What not to do with your rates
Do not copy the cheapest freelancer in your skill. The cheapest freelancer is usually the most desperate, not the most successful. Do not charge per day when you mean per hour, or per article when you mean per word, because the client will hear the cheaper version. Do not quote a price before you know the scope, because an unknown scope is an unlimited job at a fixed price. Do not work for free to “build your profile”, because free work builds a profile that attracts clients who want free work. Do not lower your rate when a client says “my budget is low” without asking what they will remove from the job. A smaller job at your rate is better than the same job at half your rate.
Do not forget the fees when you quote. A price that ignores the 20 percent Fiverr fee or the 3 percent withdrawal fee is a price you will regret when the money arrives. Do the maths in the open, in a notebook, before you send the quote. It takes two minutes, and it is the difference between a rate and a guess.
A worked example: from target to quote
Put it all together with one beginner. Sana wants to earn Rs 80,000 a month from freelance social media design. She can bill 20 hours a week, which is 80 hours a month. Her floor is Rs 80,000 divided by 80, which is Rs 1,000 an hour.
A client asks for a set of 10 social media posts. Sana knows one set takes her about 5 hours. At her floor, the job is worth Rs 5,000. She adds a margin for revisions and for the hours she will spend messaging the client, and quotes Rs 7,000 fixed price. On Fiverr, the client pays Rs 7,000 and Fiverr keeps 20 percent, which is Rs 1,400, so Sana receives Rs 5,600. She withdraws through Payoneer to JazzCash, and the 3 percent fee is about Rs 170, so about Rs 5,430 reaches her. Her floor said the job was worth Rs 5,000. She earned Rs 5,430 after all fees. The quote worked, because she did the maths first.
If Sana had quoted Rs 5,000 without thinking about fees, Fiverr would have kept Rs 1,000 and Payoneer about Rs 120, leaving her Rs 3,880 for five hours of work. That is Rs 776 an hour, below her floor of Rs 1,000, and below her target. Same job, same client, same skill. The only difference is whether she did the maths before she quoted.
That is what setting a rate really is. It is not picking a number that sounds right. It is a target, divided by hours, plus fees, plus a margin, written down before you speak to the client. Do it once, properly, and every quote after that takes two minutes.
Sources
Sources checked 15 November 2026. Fees, minimums and tax rates change. Check the live official page before you rely on a figure. This article is general information, not tax or financial advice.

